Enhancing 3D-Printed PP-CF parts: A novel resin-filling technique for mechanical property optimization

Basit Öğe Kaydı
dc.authoridEryildiz, Meltem/0000-0002-2683-560X
dc.authoridAkgun, Ismail Cem/0000-0002-2217-762X
dc.authoridKosa, Ergin/0000-0002-4607-4115
dc.contributor.authorEryildiz, Meltem
dc.contributor.authorKosa, Ergin
dc.contributor.authorAkgun, Ismail Cem
dc.contributor.authorYavuzer, Bekir
dc.date.accessioned2025-03-09T10:48:46Z
dc.date.available2025-03-09T10:48:46Z
dc.date.issued2025
dc.departmentİstanbul Beykent Üniversitesi
dc.description.abstractThis study investigates a novel post-processing technique aimed at enhancing the mechanical properties of 3D-printed polypropylene-carbon fiber (PP-CF) composite parts. The method involves printing components with internal voids to reduce weight and printing time, subsequently filling these voids with a low-cost resin known for its superior mechanical properties. Through systematic experimentation varying infill density and pattern, key quantitative findings were obtained. Tensile strength generally increased with higher infill density, reaching a maximum of 55.664 MPa for the resin-filled triangle infill pattern with 60% infill density. Impact energy showed a decreasing trend with increasing infill density, with the highest impact energy of 0.5 J recorded for the resin-filled triangle infill pattern with 60% infill density. Microstructural analysis revealed that the triangle infill pattern at 60% infill density exhibited the most effective resin penetration, contributing to superior mechanical performance. These findings emphasize the importance of infill pattern selection in resin distribution and mechanical enhancement in 3D-printed composite materials.
dc.identifier.doi10.1177/08927057241259761
dc.identifier.endpage892
dc.identifier.issn0892-7057
dc.identifier.issn1530-7980
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85195604205
dc.identifier.scopusqualityQ1
dc.identifier.startpage878
dc.identifier.urihttps://doi.org/10.1177/08927057241259761
dc.identifier.urihttps://hdl.handle.net/20.500.12662/4660
dc.identifier.volume38
dc.identifier.wosWOS:001242009000001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSage Publications Ltd
dc.relation.ispartofJournal of Thermoplastic Composite Materials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250310
dc.subject3D printing
dc.subjectpolypropylene-carbon fiber composite
dc.subjectinfill pattern
dc.subjectresin-filling technique
dc.subjectpost-processing
dc.titleEnhancing 3D-Printed PP-CF parts: A novel resin-filling technique for mechanical property optimization
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu