The Effects of Small Amounts of Niobium Addition to Mechanical Alloyed AISI 304 Stainless Steel on the Microstructural and Tribological Properties

Basit Öğe Kaydı
dc.contributor.authorYavuzer, Bekir
dc.contributor.authorOzyurek, Dursun
dc.date.accessioned2024-03-13T10:30:53Z
dc.date.available2024-03-13T10:30:53Z
dc.date.issued2023
dc.departmentİstanbul Beykent Üniversitesien_US
dc.description.abstractIn this study, the effects of different amounts (max 1%) of niobium added to mechanical alloyed AISI 304 austenitic stainless steel on the hardness, density, microstructure, and wear behavior were investigated. After the AISI 304/Nb alloy powders were cold pressed, they were sintered in vacuum environment (10(-6) mbar) at 1300 degrees C. The produced AISI 304/Nb samples were characterized by scanning electron microscopy, X-ray diffraction, and hardness and density measurements. Wear tests were performed under dry friction at room temperature using a pin-on-disk wear device. Result of the study showed that the addition of niobium up to 0.4% increased the hardness of the alloy and improved wear behavior while greater ratios reduced the hardness of the alloy and negatively affected wear behavior. Oxidation occurred on the worn surface and lines were formed in the sliding direction. In addition, as the hardness values of the alloy increased, weight loss decreased.en_US
dc.identifier.doi10.1007/s12666-022-02745-9
dc.identifier.endpage211en_US
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage205en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-022-02745-9
dc.identifier.urihttps://hdl.handle.net/20.500.12662/3586
dc.identifier.volume76en_US
dc.identifier.wosWOS:000849475600002en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Indiaen_US
dc.relation.ispartofTransactions Of The Indian Institute Of Metalsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAustenitic stainless steelen_US
dc.subjectMechanical alloyingen_US
dc.subjectSliding wearen_US
dc.subjectHardnessen_US
dc.titleThe Effects of Small Amounts of Niobium Addition to Mechanical Alloyed AISI 304 Stainless Steel on the Microstructural and Tribological Propertiesen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu