Design Of A Computer Controlled PCB Prototype Production System

Ergun, Bestami Recep; Canbolat, Huseyin

Design Of A Computer Controlled PCB Prototype Production System

dc.authorid	TR17006	en_US
dc.authorid	TR138346	en_US
dc.contributor.author	Ergun, Bestami Recep
dc.contributor.author	Canbolat, Huseyin
dc.date.accessioned	2015-04-01T13:11:59Z
dc.date.available	2015-04-01T13:11:59Z
dc.date.issued	2007
dc.department	İstanbul Beykent Üniversitesi	en_US
dc.description.abstract	Mostly, electronic circuit designers need to check the operation of their design on an actual circuit. Conventionally, serigraphy or photo-etching techniques are used for this purpose. Both methods require long time and the use of chemicals. In this work, a computer controlled mechanical system is designed to chip the unwanted copper just around the conduction paths. Simply, the system separates the conduction paths from the extra copper surface on the board. The system requires only a raw PCB. The software developed for the system sends the circuit diagram to the mechanical part to create the conduction paths on the raw PCB. The system is designed as a prototype and tested for some sample circuits. The results are satisfactory for the beginning. However, the accuracy of the system should be improved for better results.	en_US
dc.identifier.citation	Journal of Science and Technology 1 (1), 2007, 72-87	tr_TR
dc.identifier.issn	1307-3818
dc.language.iso	en	en_US
dc.publisher	Beykent Üniversitesi	tr_TR
dc.relation.publicationcategory	Makale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı	en_US
dc.subject	Printed circuit board (PCB)	tr_TR
dc.subject	edge detection	tr_TR
dc.subject	electromechanical system	tr_TR
dc.subject	cutter	tr_TR
dc.subject	step motor	tr_TR
dc.title	Design Of A Computer Controlled PCB Prototype Production System	en_US
dc.type	Article	en_US