Aeroacoustics investigations of unsteady 3D airfoil for different turbulence models using computational fluid dynamics software

Basit Öğe Kaydı
dc.contributor.authorKepekci H.
dc.contributor.authorZafer B.
dc.contributor.authorGuven H.R.
dc.date.accessioned2024-03-13T10:01:24Z
dc.date.available2024-03-13T10:01:24Z
dc.date.issued2019
dc.departmentİstanbul Beykent Üniversitesien_US
dc.description.abstractNoise formation is one of the most important factors taken into consideration in the studies con-ducted in aviation areas. This paper reviews the flow area studied on the 3D NACA0015 blade profile using different turbulence models as SST k-., 6PDJRULQVN\Lilly, WALE, and WMLES to calculate the unstable flow field. In addition, the effect of mesh number and time step on the results was analyzed by using CFD program. The mesh files used in the analysis are prepared with the Pointwise program. We inserted the time-dependent flow field variables in Ffowcs-Williams and Hawk-ings (FW-H) equations as an input and Sound Pres-sure Level (SPL) values will be computed for dif-ferent turbulence models from the microphone which is positioned in the computational domain to investigate the effect of augmentation of unsteady 3D airfoil region noise level. The calculated results will be compared with each other and with the experimental data available in the open literature. In the analysis, the Sound Pressure Level (SPL) effect of mesh number was investigated by using different 3 mesh numbers being 2 million, 3 million, and 4 million. In addition, to analyze the effect of the time step on the Sound Pressure Level (SPL), ana-lyzes were made using 2 different time steps being 10-4 and 10-5; and the results were compared with each other. As results; calculated Cp values are slightly lower than the experimental value. This difference could be due to the higher Reynolds number of the experimental data. The result ob-tained from the comparison of the different turbu-lence models used is the most suitable choice is Smagorinsky-Lilly model for the use of LES meth-od in the study of the mean sound pressure related to the unsteady 3D airfoil. Also, the results obtained from the analysis with the increase in the number of mesh and the reduction of the time step were found to be closer to the experimental data. © 2019 Parlar Scientific Publications. All rights reserved.en_US
dc.identifier.endpage7573en_US
dc.identifier.issn1018-4619
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-85073543686en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage7564en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12662/3181
dc.identifier.volume28en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherParlar Scientific Publicationsen_US
dc.relation.ispartofFresenius Environmental Bulletinen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAeroacousticsen_US
dc.subjectFfowcs-Williams and Hawkings equa-tionsen_US
dc.subjectLarge Eddy Simulationen_US
dc.subjectNoise Disturbanceen_US
dc.subjectSmagorinsky-Lillyen_US
dc.subjectTurbulence Modelen_US
dc.subjectWALEen_US
dc.subjectWMLESen_US
dc.titleAeroacoustics investigations of unsteady 3D airfoil for different turbulence models using computational fluid dynamics softwareen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu