The effect of cyclic relative humidity exposure, sanding and grooving on the dimensional stability of solid wood parquet

Basit Öğe Kaydı
dc.contributor.authorKoca G.
dc.contributor.authorArioğlu N.
dc.contributor.authorAs N.
dc.date.accessioned2024-03-13T10:00:53Z
dc.date.available2024-03-13T10:00:53Z
dc.date.issued2018
dc.departmentİstanbul Beykent Üniversitesien_US
dc.description.abstractIn this study, the effect of cyclic relative humidity changes, sanding and grooving on the dimensional stability of solid wood parquet were evaluated. The experiments were carried out on oak (Quercus petraea) and sapele (Entandrophrag-ma cylindiricum) wood species. Firstly some physical tests (density, shrinkage, and swelling) were carried out on 20×20×30 mm specimens obtained from these two species. After the physical tests the parquet size specimen groups were obtained both in radial and tangential section directions and in two sizes; narrow (250×50×15 mm) and wide (250×90×15 mm). One group of parquet size specimens was sanded and the other group was grooved. There was also a group of specimen for control. After being conditioned to equilibrium moisture content at 65% relative humidity, specimens were placed in a climate chamber and exposed to cyclic relative humidity changes. The dimensions of the specimens were measured between different environmental conditions and the dimensional change was evaluated by taking into consideration the mentioned physical properties. The results show that cyclic relative humidity changes mainly resulted with an increase in the dimensional stability of sanded and cyclic conditioned specimens. There was not a significant change in the dimensional stability of grooved specimens. © 2018, Istanbul Teknik Universitesi, Faculty of Architecture. All rights reserved.en_US
dc.identifier.doi10.5505/ITUJFA.2018.50570
dc.identifier.endpage90en_US
dc.identifier.issn2564-7474
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85064834537en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage81en_US
dc.identifier.trdizinid312478en_US
dc.identifier.urihttps://doi.org/10.5505/ITUJFA.2018.50570
dc.identifier.urihttps://search.trdizin.gov.tr/yayin/detay/312478
dc.identifier.urihttps://hdl.handle.net/20.500.12662/2817
dc.identifier.volume15en_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.publisherIstanbul Teknik Universitesi, Faculty of Architectureen_US
dc.relation.ispartofA/Z ITU Journal of the Faculty of Architectureen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCyclic conditioningen_US
dc.subjectDimensional stabilityen_US
dc.subjectGroovingen_US
dc.subjectSandingen_US
dc.subjectSolid wood parqueten_US
dc.titleThe effect of cyclic relative humidity exposure, sanding and grooving on the dimensional stability of solid wood parqueten_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu