The effect of PET additive on mechanical and morphological properties of PP [PET katkısının PP’nin mekanik ve morfolojik özelliklerine etkisi]

Basit Öğe Kaydı
dc.contributor.authorKosovalı Çavuş F.
dc.contributor.authorÖzcanlı Y.
dc.contributor.authorBeken M.
dc.date.accessioned2024-03-13T10:01:24Z
dc.date.available2024-03-13T10:01:24Z
dc.date.issued2019
dc.departmentİstanbul Beykent Üniversitesien_US
dc.description.abstractIn this study, the mechanical and morphological properties of polypropylene (PP) / polyethylene terephthalate (PET) blends were investigated. The optimum ratio of the mechanical properties of PP / PET polymeric mixtures was determined accordingly. In order to determine the mechanical properties of the PP / PET blends, both dynamic mechanical analysis (DMA) and tensile tests were performed at a draw speed of 25 mm / min and at different ambient temperatures. In addition, it was analyzed by scanning electron microscopy (SEM) to observe the change of the morphological properties of PP/PET blends in relation to PET contribution. According to tensile test results, the highest Young's modulus and hardness values at room temperature were observed in PP + 40% PET sample. These results are supported by SEM results. © 2019 Gazi Universitesi Muhendislik-Mimarlik. All rights reserved.en_US
dc.identifier.endpage326en_US
dc.identifier.issn1300-1884
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-85064444313en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage319en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12662/3184
dc.identifier.volume34en_US
dc.indekslendigikaynakScopusen_US
dc.language.isotren_US
dc.publisherGazi Universitesi Muhendislik-Mimarliken_US
dc.relation.ispartofJournal of the Faculty of Engineering and Architecture of Gazi Universityen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMechanical propertiesen_US
dc.subjectMorphological propertiesen_US
dc.subjectPolypropylene / polyethylene terephthalate blendsen_US
dc.titleThe effect of PET additive on mechanical and morphological properties of PP [PET katkısının PP’nin mekanik ve morfolojik özelliklerine etkisi]en_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu