Yazar "Danalioglu, Selen Tugba" seçeneğine göre listele

Listeleniyor 1 - 3 / 3
  • Küçük Resim Yok
    Öğe
    Chitosan grafted SiO2-Fe3O4 nanoparticles for removal of antibiotics from water
    (Springer Heidelberg, 2018) Danalioglu, Selen Tugba; Kuyumcu, Ozge Kerkez; Salam, Mohamed Abdel; Bayazit, Sahika Sena
    The antibiotic wastes in environment are very dangerous for human being because of the spread of epidemics due to increasing of the antibiotic-resistant bacteria. For reducing the proliferation of these bacteria, an environmental-friendly, cheap and non-toxic adsorbent, chitosan-grafted SiO2/Fe3O4, was developed in this study. The chitosan-grafted SiO2/Fe3O4 (Chi-SiO2/Fe3O4) nanoparticles were prepared and characterised by different physical and chemical techniques such as X-ray diffraction spectroscopy (XRD), Fourier transform infrared spectroscopy (FTIR), N-2 adsorption-desorption isotherms (BET), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), scanning electron microscopy (SEM) and zeta-potential analysis. The prepared nanoparticles were used for ciprofloxacin (CPX) adsorption from water. The nonlinear Langmuir and Freundlich isotherms were applied to experimental data. And Langmuir isotherm showed the best fit. The nonlinear pseudo-first-order and pseudo-second-order kinetic models and Weber-Morris intraparticle diffusion model were applied to kinetic data. The adsorption process followed the pseudo-second-order kinetic model. And the rate-limiting step was intraparticle diffusion step. The most suitable eluent for CPX desorption was determined as phosphate buffer solution rather than ethanol, and NaCl solution. It desorbed the 100% of CPX solution in 5h.
  • Küçük Resim Yok
    Öğe
    Preparation of magnetic MIL-101 (Cr) for efficient removal of ciprofloxacin
    (Springer Heidelberg, 2017) Bayazit, Sahika Sena; Danalioglu, Selen Tugba; Salam, Mohamed Abdel; Kuyumcu, Ozge Kerkez
    Metal organic frameworks are widely used as adsorbent materials in recent years. In this study, the most prepared metal organic framework MIL-101 was prepared by hydrothermal method and featured magnetic property using co-precipitation method Fe3O4. Then, the prepared composite (MIL-101/Fe3O4) was first characterized using XRD, FTIR, SEM-EDS, and surface area analysis, then was used for the adsorptive removal of the most used antibiotic, ciprofloxacin (CIP). The effect of different adsorption variables which may affect the removal of CIP by MIL-101/Fe3O4 was investigated, as well as their adsorbent quantity, initial CIP concentration, pH, temperature, and contact time. The non-linear Langmuir and Freundlich isotherm were applied to experimental data. It was observed that rising solution temperature decreases adsorption efficiency, as the maximum adsorption uptake value was 63.28 mg g(-1) at 298 K and 22.93 mg g(-1) at 313 K, indicating the exothermic nature of the adsorption. The adsorption was studied kinetically and found to follow the pseudo-second-order kinetic model. The desorption of CIP from the MIL-101/Fe3O4 was investigated using three different eluents, and the results showed that phosphate-buffered solution was the most effective desorption eluent.
  • Küçük Resim Yok
    Öğe
    Removal of ciprofloxacin from aqueous solution using humic acid- and levulinic acid- coated Fe3O4 nanoparticles
    (Inst Chemical Engineers, 2017) Danalioglu, Selen Tugba; Bayazit, Sahika Sena; Kerkez, Ozge; Alhogbi, Basma G.; Salam, Mohamed Abdel
    Humic acid (HA)- and levulinic acid (LA)-coated magnetic Fe3O4 nanoparticles were prepared and subsequently characterized using scanning electron microscopy, X-ray diffraction spectroscopy, Fourier transformer infrared spectroscopy, thermogravimetric analysis, particle size distribution analysis, and zeta-potential analysis. These magnetic nanoparticles were used for ciprofloxacin adsorption from aqueous solutions. Non-linear Langmuir and Freundlich adsorption isotherm models were used to explain the adsorption equilibria. The Langmuir adsorption capacities (q(m)) were 101.93 mg/g for HA-coated Fe3O4 and 53.76 mg/g for LA-coated Fe3O4. The appropriate contact times were 40 min for HA-coated Fe3O4 and 60 min for LA-coated Fe3O4. The adsorption rates and mechanisms were determined using pseudo-first-order and pseudo-second-order kinetic models. After the adsorption studies, the loaded nanoparticles were used for desorption studies, and their desorption kinetics were investigated. (C) 2017 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.