Comparison of different polymeric resins for naproxen removal from wastewater
Küçük Resim Yok
Tarih
2017
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier Science Bv
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The polymeric resins are eco-friendly, cheap and have good surface properties. These resins were used for Naproxen (NPX) adsorption from aqueous solutions. Three different resins were chosen. These are Amberlite XAD-2, XAD-4 and XAD-16. The effects of adsorption variables were tested. The variables were selected as adsorbent quantity, NPX concentration, pH of solution, temperature and contact time. Langmuir and Freundlich isotherm models were applied to the experimental data. And it was observed that Langmuir isotherm model fitted the experimental data properly. The pseudo second order kinetic model and Weber-Morris intraparticle diffusion model were used for kinetic analysis of NPX adsorption. The pseudo second order model was the best fitted kinetic model for NPX adsorption. The rate-controlling step was determined as the intraparticle diffusion step. The NPX adsorption on Amberlite resins was exothermic process. According to isotherm parameters, separation factor (R-L) values, kinetic and thermodynamic data, XAD-4 was found to be the most suitable adsorbent for NPX adsorption. Amberlite XAD-4 reached the maximum removal percentage (99.88%) at 0.5 g of adsorbent. NPX adsorption capacity of XAD-4 was 6.52 mg/g at 308 K, according to Langmuir isotherm model. (C) 2017 Elsevier B.V. All rights reserved.
Açıklama
Anahtar Kelimeler
Amberlite XAD-2, Amberlite XAD-4, Amberlite XAD-16, Naproxen, Adsorption
Kaynak
Journal Of Molecular Liquids
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
241
