Uslu, HasanDemir, GokselBayat, CumaWasewar, Kailas L.Bamufleh, Hisham S.2024-03-132024-03-1320142005-86242092-7037https://doi.org/10.12989/mwt.2014.5.4.295https://hdl.handle.net/20.500.12662/3742Adipic acid (hexane-1,6-dioic acid) is one of the most used chemical in industrial applications. This must be separated from any environmental contaminant. In this study, adipic acid separation from wastewater by adsorption method onto Perlite or Perlite + Mn or Perlite + Cu composites was investigated. Adsorption of Adipic acid was investigated in terms of equilibrium, and thermodynamic conditions. For thermodynamic investigations the experiments carried out at three different temperatures (298 K, 318 K, 328 K). In the equilibrium studies, 2 g of perlite and its composites were determined as the optimal adsorbent amount. Freundlich and Langmuir isotherms were applied to the experimental data. Freundlich isotherms for all temperatures used in this work gave some deviations with R square values under 0.98 where as Langmuir isotherm gave good results with R square values upper 0.99 at different temperatures. As a result of thermodynamic studies, adsorption enthalpy (Delta H), adsorption entropy (Delta S), and adsorption free energy (Delta G) have been calculated for each adsorbents.eninfo:eu-repo/semantics/closedAccessadsorptionadipic acidperlitemanganesecopperArticle10.12989/mwt.2014.5.4.2952-s2.0-849099988333044Q32955WOS:000348598700005N/A